60 mhz saw differential delay line 6 mhz bandwidth part number: SD0060CN02270T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSD0060CN02270T rev b 9-feb-2010 ecn 36650 page 1 of 3 description ? 60 mhz saw differential delay line with 6 mhz bandwidth. ? 22.1 x 12.7 mm dip. ? rohs compliant. typical performance horizontal: frequency : 5 mhz/div vertical from top: relative magnitude : 10 db/div relative magnitude : 1 db/div phase linearity : 5 deg/div group delay deviation : 50 ns/div
60 mhz saw differential delay line 6 mhz bandwidth part number: SD0060CN02270T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSD0060CN02270T rev b 9-feb-2010 ecn 36650 page 2 of 3 specification parameter min typ max units center frequency (fc) 1 - 60.00 - mhz insertion loss at 60 mhz - 31 34 db amplitude variation (57.0 to 63.0 mhz) - 2.1 3 db p-p delay time of short path 0.620 0.650 0.680 usec delay time of long path 0.870 0.900 0.930 usec lower 3db band edge - 56.35 57.00 mhz upper 3db band edge 63.00 63.95 - mhz short/long path integration loss difference - 1.3 2.0 db average differential delay (pins 1 to 7) 248 250 252 nsec temperature coefficient of delay - 23 - ppm/ c source and load impedance - 50 - ? ambient temperature - 25 - c notes: 1. all specified bandwidths are referenced to this frequency. maximum ratings parameter min max units storage temperature range -55 85 ? c operating temperature range -55 85 ? c input power level 15 dbm matching circuit typical component values: (minimum inductor q = 40) notes: 1. recommend use of 2% tolerance matching components. 2. component values may change depending on board layout. ls1 = 330 nh ls2 = 390 nh ls3 = 390 nh 8 7 14 1 input 50 ? single-ended short delay output 50 ? single-ended gnd long delay output 50 ? single-ended
60 mhz saw differential delay line 6 mhz bandwidth part number: SD0060CN02270T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSD0060CN02270T rev b 9-feb-2010 ecn 36650 page 3 of 3 package outline iso 9001 registered all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. units: mm tolerances are 0.15 mm except for the overall length, width and pad dimensions, which are nominal values. pin configuration: input: 8 output (short delay): 7 output (long delay): 1 ground: 2,9,14
|
